ÖLFLEX CLASSIC 110 18G0,75 T500

ÖLFLEX® CLASSIC 110 VDE-registered oil-resistant PVC control cable for a wide range of applications ÖLFLEX® CLASSIC 110 - PVC control cable, VDE registered, oil resistant and flexible for various applications, 300/500V, alsofor YSLY or YY CPR: see www.lappkabel.com/cpr VDE certificate of conformity with factory surveillance. Very broad range, items with up to 100 conductors For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load Dry or damp rooms that are subject to medium mechanical loads Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG) In power chains for a travelling distance up to 5 m and 0,2 ... 1 million bending cycles, for following dimensions: 0,5 to 2.5mm² and 2 to 7 conductors. Flame-retardant according IEC 60332-1-2 Good chemical resistance. Oil-resistant according to DIN EN 50290-2-22 (TM54) VDE reg. no. 7030 for the following sizes: up to 2.5 mm²: 2 - 65 cores from 4 mm²: 2 - 7 cores from 25 mm²: 2 - 5 cores Fine-wire strand made of bare copper wires PVC insulation LAPP P8/1 Cores twisted in layers PVC outer sheath, grey (similar RAL 7001) Core identification code: Black with white numbers acc. to VDE 0293-1 Conductor stranding: Fine wire according to DIN EN 60228 (VDE 0295), class 5 / IEC60228 class 5 Torsion movement in WTG: TW-0 & TW-1. Minimum bending radius: Occasional flexing: 10 x outer diameter In power chains: 15 x outer diameter. Fixed: 4 x outer diameter Nominal voltage: U0/U: 300/500 V Test voltage: 4000 V Protective conductor: G = with GN-YE protective conductor. X = without GN-YE Temperature range: Occasional flexing: -15°C to +70°C In power chains: -5°C to +70°C Fixed installation: -40°C to +80°C