LAPP UNITRONIC BUS PB FD P 1X2X0,64 T500

UNITRONIC® BUS PB FD P Halogenfree, highly flexible PROFIBUS cable Bus cable for PROFIBUS-DP, -FMS and FIP. Halogen free and enhanced flame retardance. Temperature range from -40°C bis +80°C Power chain Due double screening it is suitable for installation in electromagnetically demanding areas Cables can be used for PROFIBUS-DP as well as PROFIBUS-FMS and FIP For use where the combination of a halogen-free outer sheath with properties similar to PUR and enhanced flame-retardance is required Application range PROFIBUS DP (in accordance with DIN 19245 and EN 50170, e.g. for SIEMENS SIMATIC® NET, also suitable for FIP - Factory Instrumentation Protocol). For highly flexible applications (power chains, moving machine parts) Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG) Halogen-free Flame-retardant according IEC 60332-1-2 Oil-resistant Based on the bit rates listed, in accordance with PNO specifications the following maximum cable lengths for a bus segment apply (cable type A, PROFIBUS-DP): 93.75 kbit/s = 1200 m 187.5 kbit/s = 1000 m 500 kbit/s = 400 m 1.5 Mbit/s = 200 m 12.0 Mbit/s = 100 m Stranded bare copper wire Core insulation: foam skin, (O2YS) Overall screening with copper braid and plastic-laminated aluminium foil Outer sheath: PUR, violet (RAL 4001) Mutual capacitance: (800 Hz): max. 30 nF/km Peak operating voltage: (not for power applications) 250 V Torsion movement in WTG (wind turbine generator): TW-0 & TW-2, refer to Appendix T0 Minimum bending radius: 65 mm Test voltage: Core/core: 1500 V rms Characteristic impedance: 150 ± 15 Ohm Temperature range: Flexing: -30°C to +70°C Fixed installation: -40°C to +80°C